This product is efficiently utilized that delivers the elegant atmosphere to your kitchen space with its great design and color. The perfect size of the device can be placed anywhere in indoor-space with the stylish and sleek design.
Oversize platinum titanium electrolysis plates incorporate KYK's slotted plate technology, providing the best of all worlds; extremely long life-span, optimal electrolysis and optimal ionization, with none of the problems associated with mesh plates or the less effective ionization capabilities of non-slotted plates.
SMPS power supplies provide extremely stable power eliminating power loss and shortened life-span as is typical with older technology transformer-based power supplies systems.
An activated carbon filter ensures pure water for 9000 liters(2377 gallons), and a specialized media filter removes fluoride and heavy metals for 6000 liters (1585 gallons). Both filters have extremely long life-spans, cutting down on the cost per gallon.
The KYK Product tracks actual water usage rather than the amount of time that the unit is operating as do many other water ionizer products also reducing cost per gallon.
The KYK Product continually monitors the cleanliness of its filters and promptly notifies you when the filters need to be replaced.
Four alkaline water settings (8.5pH, 9.0pH, 9.5pH, and 10.0pH), one pure water (filtered only) setting and four acidic water settings (5.5pH, 5.0pH, 4.5pH, and 4.0pH), all with a convenient touch sensor selection system.
The KYK Product allows you to program nearly any pH and ORP combination, so as to customize your pH and ORP to the level that's right for you. This feature is essential due to the wide range of tap water quality in North America. Non-programmable ionizers cannot adjust to local tap water conditions, so these ionizers are at the mercy of your tap water and a handful of pre-set pH levels. The actual pH levels of non-programmable ionizers can vary greatly from the pH levels posted on the 5 control panel of the unit. Simply put, when used in two different cities or states, a non-programmable ionizer will typically get two completely different pH level outputs when kept at the same pH setting.
Shows pH level estimates, ORP level estimates, auto-diagnosis error codes, actual number of liters of filter life left in each filter, water flow rate, and sound levels.
The KYK Product can show either the ORP or the pH of the water being ionized.
The KYK Product notifies you of each system function with soothing voice prompts, chimes, and soft music - all of which have five volume levels, as well as mute.
The KYK Product continually monitors six internal operating systems ensuring that you are immediately notified in the highly unlikely event of a problem.
The KYK Product automatically initiates a cleaning cycle after each use.
Drains water into the electrolysis cell system and filter to enhance full system cleaning and greatly extend the life-span of the KYK Product system over other water ionizer products.
The KYK Product controls the pH and ORP of your water by adjusting the ionization according to the mineral content of your tap water. This allows the KYK Product to estimate and display the pH and ORP of your water. No other system can do this.
Unlike the plastic adaptors which are used in other systems and are prone to problematic leaks and the subsequent need for replacement, the KYK Product comes equipped with stainless steel attachments for your faucet or cold water line.
The KYK Product easily fits in with any decor in your home.
|Manufacturer :||KYK Co., Ltd.|
|Purpose :||Production of alkali water over pH 8.5 for drinking|
|Line Voltage and Frequency :||AC 110/220 V, 50/60Hz|
|Energy Use :||150 W|
|Size and Weight :||Size: 340(W) x 340 (H) x 150 (D) (mm)
|Mounting and Water Supply :||Mounting : standalone
Water supply : direct connection to tap water
|Controls :||Touch buttons|
|Operating Temperature :||5 to 35°C|
|Operating Water Pressure :||1.5 to 3.0 kgf/cm2|
|Display :||Displays pH and ORP levels, 7 colors, water flow rate per minute, water purification, sound indicator, filter life for 1st and 2nd filter, auto-diagnosis codes, water purification|
|Electrolysis Method :||Continuous electrolysis (including flow sensor)|
|Electrolysis Rate :||Alkaline water: 2-3 liters per minute
Acidic water : 1.5 liters per minute
|No. of pH levels :||4 levels of acidic water, filtered only water|
|Electrolysis Cell :||5 or 7 sheets of Platinized Titanium|
|Electrodes Cleaning :||Automatic after every use|
|Filter Life Indicator :||Remaining filtering capacity displayed in liters on the screen|
|Filter :||1st filter: composite filter
2nd filter: composite filter
If you have any query related to WATER IONIZER... We are availableContact us